Nation and States Assignment Example | Topics and Well Written Essays - 750 words - 4

Nation and States - Assignment Example Therefore, characteristics that identify a state include existence of a form of government, an organized economy, recognition of other existing states and their territorial legitimacy (White 67). The above distinctions between a state and a nation imply for instance that the Chinese, Americans, French and Swedes are nations, but China, United States of America, France, and Sweden are states (Shelley ix). Sometimes there are no clear distinctions between the two especially when countries such as the United States and India include smaller units also referred to as â€Å"states† but internationally, the these countries are still recognized as states. There are also examples where some nations and states have a close connection such as the case of most Japanese people living in state of Japan while a majority those residing in the state of Japan are also Japanese nationals. There are also cases where nations exist in more than one state in addition to a single state having several nations. This is the case for Arabs who are the many states found in North Africa and South-west Asia. Several definitions have been used to describe the Arab nation including those who are from the lineage of people ancient Arabia, those who speak Arabic as first language and having citizenship of a country that belongs to the League of Arab States. However, there is no single state for all Arab natio nals but multiple states that include Qatar, Libya, Saudi Arabia and Egypt among others (Shelley ix). Several factors place a nation like the United States at an advantaged position over a state like Afghanistan.  

The systems approach Case Study Example | Topics and Well Written Essays - 1250 words

The systems approach - Case Study Example This would also make the solution less cost effective and a delay in solution deployment. Ans) Prototyping model would not suit Saint James Hospital as in such an organization employees have very less time due to continuous involvement and work. On the other hand, waterfall model would suit such an organization which would take time analyzing the organization thoroughly and deploying a one time solution with minimal changes in the process. Ans 1) Yes. A problem persists. Don Lehnert, Vice President of Marketing, has not shown any interest in the development of MKIS. On the contrary he is more focused on extending into the New England Market. His involvement in the development of the solution is mandatory as he and his team is the one who would be using the information produced from the system. All the reporting procedures and reports to be generated must be in alignment with the Marketing department which make it mandatory for Mr. Lehnert to be involved in the project. Ans 2) The synergy that Sue has mentioned can only be achieved when the solution involves all the related departments into one body. Absence of the marketing department would loose the essence of the solution as the solution should be able to input the data from the manufacturing and accounting department and can help the marketing department to efficiently and effectively use the information output in the form of reports to decide on the factors of marketing and help him make a better decision when marketing his product. Ans 3) Rankin is currently focused towards the New England market. Lehnert's focus should be towards developing the MKIS so that when the company launches its product into New England, he would be in a better position to market his product into the new market. A meeting needs to be setup between the department heads, Sue Ranking and myself to ensure the requirement of one person in one role. Lehnert and Rankin both focusing on the new market would cause redundancy. I would probably be the best choice to chair the steering committee from then onwards as I have the financial and Information Systems background and can take information from all the required perspectives and get a solution made which would best suit everyone's requirements. CONFIDENTIAL REPORTS Ans 1) Making reports web accessible will affect the confidentiality availability and integrity of the reports available. Trojan horses, worms, spyware, hackers are just a few threats that Fair Heights will have to encounter maintaining the confidentiality of the reports when making them web accessible. Disaster management and risk management are two of the factors that Fair Heights will have to deal with when considering availability of the reports. Hackers and spyware will be an issue when considering maintaining the integrity of the reports. Ans 2) Threats that Fair Heights may have to face include internal or external and accidental or deliberate. Virus, worms, Trojan horses, spyware, and adware are few of the external threats; Disclosure, theft, use, destruction, denial of service and modification are a few of the internal threats

Examples Of National Cinema

Examples Of National Cinema Q: With reference to one or two films ,discuss the ways in which films can operate as examples of national cinema. Draw on relevant academic reading in order to illustrate your answer and develop your argument. National cinema is an important term in studying film. In this essay, we will discover the concept of national cinema through British cinema as an example. In the second part, we will illustrate Stephen Daldrys Billy Elliot(2000) to discuss the ways in the film can operate of nation cinema. National Cinema can be define as film which being produce with the national identity of the country following the aspect from culture, background and political of the particular country. (Hjort, 2000) Our focus will narrow down on the British cinema, which experience the threat from Hollywood towards their local market their intention to break down the Hollywood domination on the local market as well as the media culture pollution brought by the US film after the WWI. The three main issues which need to be overcome by the British Cinema are the production, consumption and representation of their films towards the national audiences (market). (Newland, 2010.) There are many successful film being produce by the national film maker which had receive critical reception internationally examples such as production from Harry Saltzman and Albert R. Broccoli. They combined sex with exotic locations, casual violence and self-referential humor in the phenomenally successful James Bond series with Sean Connery in the leading role. The first film Dr. No was a sleeper hit in the UK in 1962, and the second, From Russia with Love (1963), a hit worldwide. By the time of the third film, Goldfinger(1964), the series had become a global phenomenon, reaching its commercial peak with Thunderball the following year. The revolution of national film which being brought forward by implementing a more liberated attitude to sex, capitalizing on the swinging London image propagated by Time magazine had broke the taboos around the portrayal of sex and nudity on screen. The standard of film quality and blockbuster production of film had been benchmark by the Hollywood film and the genre of the type of movie produce with the element being put into the film. These were not the norm or the culture accepted by the film producer in the British. The more daring approach in including more gore and explicit scene had more appeal to the audiences and the horror movie from the America s The Texas Chain Saw Massacre (1974) had make Hammers vampire films seem increasingly tame and outdated, despite attempts to spice up the formula with added nudity and gore. (Martian, 2004) Although some attempts were made to broaden the range of British horror films, such as the comic adaption from Captain Kronos, Vampire Hunter or the cult favorite The Wicker Man, these films had made little impact at the box office. However there are many Hollywood films with a British dimension (based on British people, stories or events) have had enormous worldwide commercial success. Six of the top seven highest-grossing films worldwide of all time have some British historical, cultural or creative dimensions: Titanic, The Lord of the Rings, Pirates of the Caribbean and the Harry Potter movies. The second culturally American film on the list, Star Wars at number 9, was filmed principally in the UK. (Imdb, 2010.) Adding four more Harry Potter and Lord of the Rings films, plus three about a Scottish ogre in British fairy tale setting (Shrek), and about two-thirds of the top twenty most commercial films, with combined cinema revenues of about $13 billion, had a substantial British dimension. (ibid.) British influence can also be seen with the English Cycle of Disney animated films, which include Alice in Wonderland, Peter Pan, The Jungle Book, Robin Hood, Dalmatians, The, The Rescuers and The Many Adventures of Winnie the Pooh. (Simth, 2003) The British cinema market is too small for the British film industry to successfully produce Hollywood-style blockbusters over a sustained period. As such, the industry has not been able to produce commercial success internationally in comparison. The British film industry consequently has a complex and divided attitude to Hollywood. On the one hand Hollywood provides work to British directors, actors, writers, production staff and studios, enables British history and stories to be made as films, and opens up the US and world markets to a limited participation by some in the British film industry. On the other hand, the loss of control and profits, and the market requirements of the US distributors, are often seen to endanger and distort British film culture. The success from these film had clearly reflect that there is something missing in the British film because with the same resources by the Hollywood there are able to produce blockbuster which create great impact on the national and international reception. Put more emphasis on British cinema production, British support their film industry although Hollywood has a great impact on British cinema. The UK Film Council was created in 2000 aims to develop and promote the widest possible enjoyment and understanding of cinema throughout the nations and regions of the UK. (UK Film Council, 2006). British film Institute, BBC, FilmFour etc. also is a major organization to support and fund British film. However, British film can be funds by Hollywood companies such as The Full Monty funds by Fox Searchlight due to British film have co-production and distribution deal with Hollywood studio. British government offers film tax relief of UK filming. Unfortunately, in recently, a Republican wants to reduce the tax break from 25 percents of the film production to 15 percent.(Cooper, 2010) Murphy, R. in The British cinema book concluded the cause in Britsih cinema finance support by different country: à ¢Ã¢â€š ¬Ã‚ ¦while British cinema may depend upon international finance and audiences for its viability, this may actually strengthen its ability to probe national question, that while cinema has apparently lost its national audience in the cinemas, it may have gained a more fully national audience via television, and that while British cinema may no longer assert the myths of nation with its earlier confidence, it may nonetheless be a cinema which is more fully representative of national complexities than ever before. (Murphy, 2004) In conclude, British cinema is an example to illustrate the national cinema in this essay, of course, there are different cinema can contribute national cinema such as French cinema and Italian cinema. The relationship between national cinema and Hollywood is a worthy discussion topic. The term of national cinema is continent developing by the social and economic change. Billy Elliot (2000) is an example to analysis how a film to operate a concept of national cinema. Billy Elliot is a mixed genres film, it is a social drama with a strong vein of comedy. (Mahon, 2004). In terms of national cinema, Billy Elliot is a British film full of logical. It low budget film supported by BBC Films and National Lottery funds, has a British cast, is directed by British director (Stephen Daldry), editor (John Wilson), cinematographer (Brian Tufano), screenwriter (Lee Hall) and choreographer (Peter Darling). Even the music, by T Rex, the Jam and the Clash is unashamedly British. (Lister, 2000) Obvious, the film was filmed in Great Britain. Story background set in 1984, Durham. Eleven years old main character Billy struggle to be a ballet dancer whiles his family not supporting him. His father and brother are miners whom involved the historic miners strike. Billy continued learn ballet with his private teacher. Billy becomes a famous ballet dance after he overcomes th e problem of financial and family. Billy Elliot is an inspiring and heat-warming film with political, social, and gender issue being raised in the film. In the political part, Billy and his family is a member of Nation Union of Mineworks who involved the miners strike during 1984-1985 in northern England. Although screen writer Lee Hall said they à ¢Ã¢â€š ¬Ã‚ ¦didnt get the broader political context of the miners strike in -frustrating.(Teeman, 2008.) The film distributes the identity and also chronicles the British industry history and strikes and makes the film realistic. It included several scenes depict the conflict and violence between the police and the miners such as crossing the picket and the catchword -scabs. Alan Sinfield concluded those scenes in Boys, Class and Gender: Police with batons and riot shields are seen charging through alleys and houses, overthrowing any sense that private life is immune from the gross activity of the state. (Sinfield, 2006) During that two year was a bitter year for miners and the middle-class, for example, the Elliots family not having coal for heat in the winter. Billys father Jackie gave up on the strike in order to finance Billy to London to further his ballet studies. The cinematography and the scene being capture had provide the audience to visualise one of the most difficult times by the people through poverty and hardship due to the economic and political unrest. For the social part, Class, the films presents the working-class plight in England by Tory government of 1980s.(Kaplan, 2004) Again, the strike had reflect the right of working class to pursuit their welfare. Billys father has not been to London in his entire life. Billy and his father amaze the gorgeous architecture when they go to the Royal Ballet School. Billy Elliot also represents the acceptance and openness in England. In that time is generally accepted that ballet is not for lower class, is for girl and boy do ballet is means he is homosexual. Billy Father Jackie said For girls, not for lads, Billy. after he found out Billy attend the ballet class. In majority people they gendering of ballet as feminine, for boy, they do boxing, football and wrestling. Billy also repeatedly explained that he is not homosexual even he do ballet. Gender, Billy Elliot did not put emphasis on female even the female ballet teacher plays a major impact on Billy. Billy is in close relationship with his father, brother, and his cross-dressing friend Michael. His father, brother and miners against the police in heavy industrial which represent male plat the role of maintain the family and economic pillar. His friend Michael as a homosexual, Billy accepts him and treats him as best friend. In the end of the story, Michael attends to Billys ballet show, he make up and transvestite with a black man who perhaps his boyfriend. Cora Kaplan described the idea of gender issue in The Death of the working-class hero: Billy Elliot, which has a strongly marked gay subtext: to support its homo-social and gently homoerotic narrative, femininity as a negative or abject trope must be cordoned off from the films redefinition of masculinities, both heroic and ordinary. (Kaplan, 2004) Billy Elliot represents the social, political, gender and class issue in British in 1980s. Of course, there are many factors lead to this film success and more British. Scenes setting, national miners strike is a remarkable history in British. Filming in fictional country town Everington, where is a in the real in Durham, northern England. It is one of the largest mining communities to the strike. (Mahon, 2004.) The dispute sequences between police, `scabs and strikes also make the film realism. Beside strike, the landscape in countryside and scenes of Billys house is small, simple kitchen, and crude bathroom depicts the poverty and the life standard of working-class. In the last few scene at Royal Ballet School, London, shows a city, transportation and the grand design in Britain capital in comparison with countryside. In addition, Billy Elliot simple customs also represent the poor mining community hardship in 1980s. For example, in the whole film Billy only wears one short, single t, jeans, jacket and school uniform as his clothing. Billys family even cannot dress warmly and get heat in the winter. Mr. Wilkinson is ballet teacher, middle class, her casual style, messy hair and cigarettes enriched her character. The dialogue delivered in thick lower class British accents and slang. Music is an important part in the film, Billy Elliot is a story about ballet. It surprise that the music is not just included classic music like Swan Lake but also involved rock music and tap dance. The film uses 70s British rock band T-Rex Cosmic dancer and I love to boogie. Its lyrics and style highlight Billy passion in dancing. Town called malice by Jam selected in Billy main dance sequence to shows Billy angry and ambition. The touching, funny, and real history background story with good performance lead to Billy Elliots success in British and international. In Britain, it nominated six and won Best British film, best actor (Jamie Bell) and best supporting actress (Julie Walters) in British Academy of Film and Television (BAFTA) reward. It also nominated three Oscar. This huge success led to the stage, Billy Elliot the Musical opening on 31 March 2005 until present in London. The music is play by famous British songwriter Elton John. The musical continue the success of film while the musical won 10 Tony Awards and production in New York, and Australia. The `British elements in the film which we described above, it seems Billy Elliot is a British full of reasons. Broadcaster Caroline Westbrook reviewed Billy Elliot: Those who have lost faith in the British film industry prepare to have it restored.(Westbrook, 2000) However, some people and academic hold a different opinion, in fact, Billy Elliot was distributed by the largest Hollywood distributor in Europe, UIP. Xan Brooks in The Guardian claims that: Like it or not, Hollywood has shaped homegrown cinema. Billy Elliot, then, is a basic British story told an American Vernacularà ¢Ã¢â€š ¬Ã‚ ¦Of course Luddites may argue that Billy Elliot is therefore not purely British. Except that Britain itself is not purely British any more (at least not in the high Tory sense of the film). (Brooks, 2000) Despite some argument of the `Britsih film Billy Elliot, there is no doubt that the film represents the English national identity in terms of political, social and gender issue. It reflects the British culture in 1980s. Billy Elliot is a suitable example to operate how a film does as a national cinema which we discussed in this essay.

The Return :: essays research papers

The Return Essay   Ã‚  Ã‚  Ã‚  Ã‚  The novel The Return, written by Sonia Levitin, is a fascinating novel written to show the oppression that Ethiopian Jews suffer. The Return is about a young Ethiopian Jewish woman named Desta, who, with her immediate family, travels to Israel for freedom. During this journey, her brother Joas is shot and dies, she has difficulty finding the group she is supposed to walk with, and she has to stay in a refugee camp for a short period of time. Finally, she reaches her destination and lives in Israel from then on. There are three main topics illustrated in this novel. Prejudice and its effects, maturing and finding one’s own identity, and joining together to achieve common goals.   Ã‚  Ã‚  Ã‚  Ã‚  Prejudice against Ethiopian Jews plays a big role in the Jews’ lives. For example, early on in the novel, Joas makes Desta realize that Ethiopian Jews are not even allowed to pray aloud. This relates to prejudice and its effects because praying aloud is very important for Jews and taking that away from them is the ultimate form of oppression. Furthermore, the novel explains that Ethiopian Jews are called Falasha (strangers) even though they have lived in Ethiopia for generations and are citizens. This is an example of the prejudice because calling an entire section of the population strangers makes them feel like outsiders. Also, when Desta and her aunt want to sell their pottery, the other Ethiopians pay them an unfair price. The prejudice against Ethiopian Jews is illustrated by the fact that non-Jewish Ethiopians cheat Jewish Ethiopians in commerce. Finally, when Desta and Almaz go to a small town on the way to Israel, the people of the town begin shouti ng at them, â€Å"You are buda, go before we kill you!† The people also refuse to give them food even though they are obviously starving. This episode in the novel shows the racial hatred felt by many against Jews.   Ã‚  Ã‚  Ã‚  Ã‚  During the journey to Israel, maturing and finding one’s own identity plays a big part in Desta’s and her family’s lives. For example, when Joas is shot, Desta has to take care of her younger sister and lead the way to Israel. This shows maturing on Desta’s part because now she is the one in charge, she is able to take care of her younger sister and get food so that she and her sister do not starve and she never gives up on going to Israel.

Actus Reas and Men Rea

Actus Reus and Mens Rea Actus reus and mens rea are two of the five elements of a crime that the prosecution may have to prove to get a conviction in a criminal case. Actus reus is the criminal act. Mens rea is the intent to commit the crime. In general, the more serious a crime is, the more important it is for the prosecution to prove that both a criminal act was committed and that there was criminal intent. These more serious crimes are also known as conduct crimes. Not surprisingly, conduct crimes involve the proof of criminal conduct. Criminal conduct is often confused with criminal acts.The distinction is that criminal conduct involves both actus reus and mens rea, whereas a criminal act only involves actus reus. In the most severe of crimes, such as criminal homicide, three more elements of crime must be proven: concurrence, attendant circumstances and a bad result. Actus reus and mens rea are important because both elements are necessary to get a conviction beyond a reasonable doubt in a criminal case (Samaha, 2008, chap. 3). In order to qualify as actus reus, the act must be deemed a bodily movement that was voluntary.The reason for this is that the law is intended to punish people who meant to commit the act or can be blamed for the act. Only then are they responsible for the criminal acts they commit. Criminal law does not intend to punish people who are not responsible for the acts they committed. The problem is that most criminal codes provide vague descriptions of what a voluntary act is. Many times, the definition needs to be inferred by looking at the list of exceptions (involuntary acts) to voluntary acts. An appeal in case of Brown v.State centered around whether the jury should be given specific instructions by the judge on how to ascertain whether an act was voluntary. The defendant in that case, Alfred Brown, was bumped with a moholding was that the defendant was entitled to have the jury consider the voluntariness of his acts (Samaha, 2008, chap. 3). In order to have Mens Rea, one of two kinds of fault need to be established: subjective or objective fault. Subjective fault is more easily identifiable. Subject fault is having a bad mind, or doing something that you knew to be wrong.Objective fault does not involve a purposeful or conscious bad mind. Objective fault involves establishing that the act should have been known to be wrong by the average person. In the appeal of the case of State v. Stark, the defendant, Calvin Stark, challenged a second degree assault conviction on the grounds that he did not intend to inflict bodily harm by having unprotected sex after he was knowingly HIV positive. Mr. Starks’ appeal was on the grounds that subjective fault could not be established for the crime he was alleged to have committed.Mr. Starks lost the appeal in large part because objective fault was undeniably present in this case since the average person knows that HIV can be passed to another person by having unprote cted sex (Samaha, 2008, chap. 4). Good Samaritan Rule and American Bystander Rule The Good Samaritan Rule and the American Bystander Rule both address the requirements of what a person has to do if they are witnessing and incident where a situation requires assistance. There are really no other similarities between these rules.The Good Samaritan Rule is only used in a few jurisdictions. This rule makes a person legally responsible to either help or call for help when a person is in need. In contrast, the American Bystander Rule states that there is no legal duty to help someone in need, even if it the bystander is risking nothing by helping someone or calling for help. Even in cases where it is clearly morally wrong to stand by and watch someone suffer, the bystander is not violating any criminal law by doing nothing (Samaha, 2008, p. 91). In the case of Commonwealth v.Pestinakas, the defendants, Helen and Walter Pestinakas were convicted of third degree murder in Pennsylvania for n eglecting to care for an elderly man who was terminally ill. In the appeal to this case, the judgments of sentence (five to ten years in prison for each defendant) were upheld because the court ruled that there was a legally binding oral contract in place for the Pestinakases to provide care for the victim, Joseph Kly. The Good Samaritan Rule does not apply in Pennsylvania and the American Bystander Rule does apply.The dissenting opinion was interesting in that it was pointed out that the legislature may not have intended for a contractual duty to be a duty imposed by law. If indeed that were not the intent of the legislature, then the Pestinakases may very well have won their appeal based on the American Bystander Rule. Although neglecting an elderly man while serving as his caretaker is probably morally wrong in the eyes of most, the American Bystander Rule would have protected the Pestinakases from legal prosecution (Samaha, 2008, p. 92-93). In the case of State v.Kuntz, the defe ndant, Bonnie Kuntz stabbed her boyfriend, Warren Becker, and then did not call for help, so he bled to death. In addition to being convicted of negligent homicide, the defendant was also charged with a separate crime for failure to summon for medical aid. Ms. Kuntz appealed the latter conviction with the American Bystander Rule as her basis. There are some exceptions to the American Bystander Rule that do make a bystander criminally liable for a failure to act. In the opinion of the court, this case met one of those exceptions, since Ms.Kuntz had a duty to summon for help because she created the peril. In other words, if you mortally wound someone, you are criminally liable if you don’t summon for aid, notwithstanding the American Bystander Rule (http://www. soc. umn. edu). The Good Samaritan Rule is also not always so â€Å"cut and dry†. Although the rule requires that you help someone in need or summon for help, but a recent ruling, Van Horn v. Watson, held that a s tate statute only protects people who attempt to provide medical care to someone who needs it.In Van Horn v. Watson, court held that the co-defendant, Lisa Torti was held liable for rendering the defendant, Alexandra Van Horn, paraplegic after pulling Van Horn from a vehicle that Torti thought was going to explode (Miller, 2009). Although this was not a criminal case, this shows that the Good Samaritan Rule does not provide protection against every scenario of helping a victim in need, just as the American Bystander Rule does not the bystander from needing to help or summon for help for a person in need.Although the rules seem to be opposites, each has exceptions that make them more similar. Constructive and Actual Possession Constructive possession is when someone has control of a banned substance, but it is not on his/her person. In other words, it may be in or on something he/she owns, such as a vehicle, a place they live, such as their house, or another area he/she controls, suc h as his/her office. Actual possession is when someone has physical control of the banned substance. In other words in might be in their shoe.Constructive and active possession both need to meet the two aspects of possession. In order to constitute possession as a criminal act, there needs to be both control of the items and awareness of the control. The main difference between constructive and active possession is that with active possession, the substance is found on the person, whereas with constructive possession, the substance is found in an area in which the person is responsible (Samaha, 2008, p. 97). The case of Miller v.State provides a good discussion in the court’s opinion on constructive possession. In that case, a passenger in a car was convicted of possession of marijuana and cocaine. The defendant, James Luther Miller, appealed the case on the grounds that he did not knowingly possess the drugs. Other passengers in the car were smoking marijuana and they had cr ack cocaine stashed in the car. In the appeal, the court affirmed the marijuana possession conviction and reversed and dismissed the cocaine possession conviction.According to the court opinion, in order to constitute constructive possession in a case involving multiple occupants in an automobile, there are several things that need to be considered. These factors include whether the drugs were in plain view of the accused, whether they were found on the accused, whether they were in close proximity to the accused, whether the accused is the owner of the car and whether the accused acted suspiciously.In this case, many of these factors were probably true in the case of the marijuana, but none of them were definitively true in the case of the cocaine. In the case of the cocaine, the court found that Mr. Miller did not have knowing possession of the cocaine and instead had mere possession. Only Montana and Washington do not require knowing possession to charge someone with criminal pos session. Since this case was in Arkansas, the appeal was successful for Mr.Miller on the cocaine possession charge (Samaha, 2008, pp. 97-98). References Did she have a legal duty to report or intervene? Retrieved from http://www. soc. umn. edu/~samaha/cases/state_v_kuntz_omission. htm. Miller, C. (2009, January 14). Calif. lawmakers rush to rescue good samaritans in wake of court ruling. The Recorder. Retrieved from http://www. law. com/jsp/article. jsp? id=1202427434865&slreturn=1&hbxlogin=1. Samaha, J. (2008). Criminal Law. (9th ed. , chap. 3-4). Belmont, CA: Thomson Learning, Inc.

Describe the spatial patterns and dimensions of one ecosystem at risk, and analyse the negative impacts of human activity on this ecosystem Essay

Describe the spatial patterns and dimensions of one (1) ecosystem at risk, and analyse the negative impacts of human activity on this ecosystem. One ecosystem at risk that has been studied is the coral reef; The Great Barrier Reef is located off the East coast of Northern Queensland. It stretches approximately 2300km from Papua New Guinea to Fraser Island. Overall the Great Barrier Reef system covers an area of over 348,000km2 making a vast, very complex ecosystem. There is a long history of human activity and use on and of the Great Barrier Reef. Negative impacts on the Great Barrier Reef include climate change, oil spills, tourism, overfishing, land clearing, sewage and waste disposal, coral harvesting and dredging and sand mining. Climate change has impacted Northern Queensland and the Great Barrier Reef as it increases in sea temperature, increases in average sea level, has a change in rainfall patterns. It changes the ocean currents and circulation, which has an increase in El Nino events which cause extreme weather and can damage the reef and cause a large amount of run off from the land, causing turbidity, lowering of salinity on the reef and increased amount of sediment. Extreme weather conditions can also increase the CO2 levels which can also change the chemical structure of the Great Barrier Reef causing coral bleaching. On-going climate change will have and has already caused many consequences for the Great Barrier Reef. This change will and has directly impacted many species of fish, invertebrate, mammals and birds along with many aquatic and terrestrial plants. There are also substantial impacts on the functioning of the reef. The biggest concern about climate change and the Great Barrier Reef is the rise in sea temperature which will affect the movement of water around the reef and the nutrient cycle on the reef which also means the chemical structure which will be altered because of the increased amount of CO2 dissolved into the water. With this and the rising sea levels, may be enough to destroy the reef, collapsing of the reef ecosystem. Recreational fishing is also a common past-time on the reef. When boats anchor on the reef, the heavy metal anchors damage the reefs coral formations and dredge up the sea grass bed. These boats are also a source of pollution through oil and oil spills, rubbish and sewage. The Great Barrier Reef Marine Park Authority estimates that around 6000 large commercial ships transit through the Great Barrier Reef each year. These ships can carry anything from grain, minerals, bulk cargo (such as cars) and oil. Luckily there has not been a major oil spill on the reef. Ships also have the potential to bring with them feral aquatic species by releasing ballast water which is used to balance the ship containing these aquatic animals. Commercial fishing or overfishing has been an important economic activity for Queensland’s coastal communities. Unsustainable fishing practices in the past have left many areas of the Great Barrier Reef with decreased fish stocks. While many areas of the Great Barrier Reef are now off limits to commercial fishers, various areas of the reef can still be fished. Local fishermen are now no longer a major threat to the reef as they understand the need to protect the area’s fish stocks. However, the reef still remains threatened by illegal fishing, which is often carried out by foreign fishing trawlers, and by unsustainable recreational fishing. Tourism is one of the most important industries in Northern Queensland and the Great Barrier Reef being ranked twelfth on the ‘Wonders of the World’ list brings a lot of tourism to Australia and especially far North Queensland. The economic value of the Great Barrier Reef exceeds more than $4 billion a year. In 2005, over 1.8 million tourists visited the reef. Research conducted by the James Cook University in Cairns has shown that tourism has five main impacts on the reef ecosystem; these are coastal tourism development, island-based tourism, marine based tourism, water-based activities and wildlife interactions. Coastal tourism development is explained as tourists mainly visit and stay at mainland Hotels, Motels and Resorts, where this places a strain on coastal environments, including estuarine river systems. Island-based tourism is the growth of tourism on islands throughout the Great Barrier Reef, which creates problems associated with sewage and rubbish discharges. Marine based tourism is where tourist boat companies make thousands of journeys out to the Great Barrier Reef each year, which brings rubbish and a potential for oil spills. These boats also require mooring points or anchor points on the reef which can destroy the coral. Water-based activities for explain diving and snorkelling are the most popular water-based activities on the reef. Most divers are very careful and usually cause no damage to the corals. However, studies have shown that a small proportion of divers swim too close to the corals, breaking them. The more fragile corals are susceptible to this. Wildlife interactions is the interactions with aquatic animals that live on the reef, most tourism operators are very careful to ensure tourists are well informed and to be strict with these rules and make sure that the tourists do not get too close to the wild animals that live on the reef, However, once again research shows that there are still a small portion of operators and tourists that are careless and disrupt wildlife which can impact on breeding cycles and natural interactions. Other impacts of tourism on the Great Barrier Reef include trampling of coral. This is a common occurrence where people walk on the reefs and the coral that become exposed at low tide. Souveniring of coral, shells and other elements of the reef ecosystem was also a major problem. In the past tourists and some commercial traders took large amounts of materials such as corals, mostly from the inner reef, which has now been constituted as being illegal unless the collector is correctly licensed. There are 26 major river systems that flow into the waters of the Great Barrier Reef from mainland Queensland. Approximately 25% of the land area of Queensland drains onto the reef. This runoff represents a major impact on the reef. Coastal development on land adjacent to the reef is expanding rapidly. Tourist developments such as those found between Cairns and Port Douglas, result in large amounts of land that is being cleared. The Great Barrier Reef Marine Park Authority has information and research that the clearing of wetlands is another major issue impacting on the sustainability of the reef. Intertidal wetlands provide important habitats and nurseries for many of thousands of species that liv eon or near the reef. These wetlands also hold a large amount of water reducing the amount of fresh water the Great Barrier Reef receives each year which keeps salinity levels stable. Aquaculture is becoming a more popular form of commercial farming. Prawns, a number of fish species and pearl and edible oysters are commercially farmed throughout the Great Barrier Reef and in ponds near or next to the reef. These farms can sometimes release chemicals and diseases that impact and cause damage to the other species of aquatic life on the reef which can also cause pollution. Conventional agriculture on the coastal plain adjacent to the reef has been of great concern for reef ecologists and marine biologists. The use of chemical fertilisers in the farming areas of the reef can increase nutrients that promote algae growth. The algae can and already has been smothering the reef which causes a decrease in light penetration for the corals to perform photosynthesis to grow. A type of agriculture that can dramatically harm the reef includes land clearing which results in the erosion of topsoil and an increase in turbidity levels in the water. There are a large number of negative impacts on the ecosystem at risk studied, but the Great Barrier Reef Marine Park Authority, along with other smaller groups including the Aboriginal Culture have been enforcing a number of ways to protect and create awareness to tourists, fishers and all people on or visiting the reef or surroundings to keep the ecosystem as stable as they can.

Students Evaluating Teachers †Education Essay

Students Evaluating Teachers – Education Essay Free Online Research Papers Students Evaluating Teachers Education Essay It is a general fact of education that more and more academic schools encourage students to evaluate and criticize teachers in order to improve the quality of education. I agree insofar as it is beneficial for students to enhance the critical thinking, while others think that it will contribute to a loss of respect and discipline. I concede that academic schools are on the correct side of this issue. After all, the quality of education is the final objective the schools pursue to. It is appropriate to assign to a high priority to the quality of education than to other accessory aspects, such as profit, enrollment. Moreover, this incentive spawns great advantage for the students, which is to enhance the capacity of independent thought, subjective judgement, emotional response, and so forth. Also, the teachers might benefit from these criticisms, which could help them to make possible universal access to their students’ information directly and accurately, and which could serve to put them more in touch with their foibles of teaching. Nevertheless, we are doing more to it irrespective of whether this incentive is acme of perfection from all aspects, the disadvantages of which can be bifurcated into two parts. One is that it may affect the routine of teachers, for the compelling reason that the dogma of criticism might be received continuously by the teachers, who are less concentrated on teaching, and whose energy may be susceptible. Another is that more and more criticism from the students may do a disservice to the confidence of teachers and give them less respect and discipline. To sum up, given above all reasons, there are considerable merits of both sides. What I suggest to do is make sure that while improving the quality of education, the academic schools should consider respect and discipline as the important factor, the function of which serve as important catalyst for adjusting both students and teachers’ behavior and facilitating the studying and teaching effectively and efficiently. Research Papers on Students Evaluating Teachers - Education EssayStandardized TestingPersonal Experience with Teen PregnancyIncorporating Risk and Uncertainty Factor in CapitalInfluences of Socio-Economic Status of Married MalesBionic Assembly System: A New Concept of SelfResearch Process Part OneBringing Democracy to AfricaRelationship between Media Coverage and Social andDefinition of Export QuotasHip-Hop is Art

Free Essays on Career Decision

Discuss the factors that influenced your career decisions to date. Also discuss your career plans and why you want to obtain an MBA. Since I was four years old, my father has left my mother and I for Indonesia to start his textile company. He has come back to Singapore once for a year. In order to enhance our relationship, we used to talk over the phone. As early as when I was Grade 8, I possessed my first computer for the main purpose of sending electronic mail to my father. From that time, using the Internet has captured most of my spare time. In the summer of 1992, I had a valuable chance of volunteering in the library to assist people using computers to look for the books or to get access on the Internet. At the same time, my father's business had been suffering from keen competition and out-dated machines for two years. He then started to automate the production line by investing in new innovated technologies, and hiring some technicians. When I visited him, the new automated production line and the whole computerized firm amused me, because this was the system that rescued my father's business. Since then, m y interest in information technology has been ever growing. After I came to Canada, I even use electronic mail and ICQ to communicate with my parent, and choose MIS as my core course. I found that IT is so powerful that it not only helps companies become more competitive, but also bridges people ocean apart. This arouses my desire to work in IT industry. Second, self-satisfaction also affects my career decision. Although monetary reward is practically important in reality, opportunity to learn and job prospect are even more crucial factors for me to be really happy and satisfied. I like learning new skills and acquiring up-dated information, because they can help me adapt the fast-changing world, enrich my experiences, explore my interest, and give me higher self-esteem as I am a valuable person. In addition, a job with ... Free Essays on Career Decision Free Essays on Career Decision Discuss the factors that influenced your career decisions to date. Also discuss your career plans and why you want to obtain an MBA. Since I was four years old, my father has left my mother and I for Indonesia to start his textile company. He has come back to Singapore once for a year. In order to enhance our relationship, we used to talk over the phone. As early as when I was Grade 8, I possessed my first computer for the main purpose of sending electronic mail to my father. From that time, using the Internet has captured most of my spare time. In the summer of 1992, I had a valuable chance of volunteering in the library to assist people using computers to look for the books or to get access on the Internet. At the same time, my father's business had been suffering from keen competition and out-dated machines for two years. He then started to automate the production line by investing in new innovated technologies, and hiring some technicians. When I visited him, the new automated production line and the whole computerized firm amused me, because this was the system that rescued my father's business. Since then, m y interest in information technology has been ever growing. After I came to Canada, I even use electronic mail and ICQ to communicate with my parent, and choose MIS as my core course. I found that IT is so powerful that it not only helps companies become more competitive, but also bridges people ocean apart. This arouses my desire to work in IT industry. Second, self-satisfaction also affects my career decision. Although monetary reward is practically important in reality, opportunity to learn and job prospect are even more crucial factors for me to be really happy and satisfied. I like learning new skills and acquiring up-dated information, because they can help me adapt the fast-changing world, enrich my experiences, explore my interest, and give me higher self-esteem as I am a valuable person. In addition, a job with ...

The 25 Best US Colleges for International Students

The 25 Best US Colleges for International Students SAT / ACT Prep Online Guides and Tips Each year, nearly one million international students enroll in US undergraduate and graduate programs. There are so many colleges and universities in the US, though, that it can be tough to know where to start, especially if you’re applying from out of the country. In this post, I’ll lay out some of the best universities for international students. Whether you’re looking for generous financial aid, large international populations, or special international programs, we’ve got you covered. Finally, I’ll lay out the five most important steps you need to take if you want to go to school in the US, straight from the State Department. Let’s get started! What Makes a School Good for International Students? Applying to college is stressful for students all over the world. If you're looking to attend an international school, particularly one that's located in the US, there are a few additional, unique obstacles to worry about: Funding your education. US schools are notoriously expensive, and international students aren't eligible for many forms of American financial aid. Finding an environment of your peers. Although some students may not be concerned with finding a group of international peers at a US school, many may feel more comfortable with a student body composed of a healthy mix of domestic and international students. You may also find more resources, student groups, and activities geared towards students from outside the US at these schools. Achieving comfort and success in a very new environment. As an international student, you may be looking for specialized social, academic, professional, and language support. Moving to a new country is stressful- it's a good idea to think about what support systems would help you transition. Although international students may have other concerns when applying to US schools, I think the above points are the most universal. The rest of this post will list the types of schools that address these problems, i.e. the best colleges for international students. I'll list the schools that give generous financial aid to foreign nationals, boast large percentages of international students, and offer special support to non-US citizens. Your own priorities will dictate which type of school might serve you best. Let's get to the good stuff- which schools should you actually start checking out? Cheapest Colleges for International Students International students aren’t eligible for federal financial aid, a big source of funding for students here in the US. Unless a school’s total Cost of Attendance isn’t an issue for you, you may want to consider institutions that allocate large amounts of their own financial aid money to international students. A school’s generosity may help cover the deficit left by a lack of access to federal aid. A little background information before we get started: attending college in the US is expensive. In fact, the US one of the most expensive places in the world to get a college education. And just because a school offers financial aid doesn't mean you won't end up paying quite a bit in the long run- it's common for students in the US to be saddled with significant student loan debt. If cost is a concern for you, the following list of cheapest colleges for international students should be a great place to start your school search. They all awarded financial aid to at least 50 students from abroad for the 2017-2018 school year. If you're worried about spending a lot of cash on your degree, you will want to look for schools that try to attract international students with financial incentives. A final disclaimer: the schools below are all pretty high-ranked institutions. Schools like this tend to have larger endowments and more money to give to students via financial aid. You’d have to be a very competitive applicant to gain admission to many of these schools (perhaps even more competitive than a similar domestic applicant). Click the name of the school to get more information about admissions statistics. Source: US News World Report Columbia University, New York, NY Number of international students who received aid: 257 Average aid amount awarded: $66,350 Harvard University, Cambridge, MA Number of international students who received aid: 594 Average aid amount awarded: $64,459 Skidmore College, Saratoga Springs, NY Number of international students who received aid: 83 Average aid amount awarded: $63,855 Williams College, Williamstown, MA Number of international students who received aid: 92 Average aid amount awarded: $62,873 Trinity College, Hartford, CT Number of international students who received aid: 170 Average aid amount awarded: $62,241 Amherst College, Amherst, MA Number of international students who received aid: 147 Average aid amount awarded: $62,022 Wesleyan University, Middletown, CT Number of international students who received aid: 98 Average aid amount awarded: $61,549 Duke University, Durham, NC Number of international students who received aid: 207 Average aid amount awarded: $61,497 Wellesley College, Wellesley, MA Number of international students who received aid: 90 Average aid amount awarded: $61,052 Vassar College, Poughkeepsie, NY Number of international students who received aid: 77 Average aid amount awarded: $61,052 Colleges With the Largest International Student Presence If you’re applying to schools in the US, financial aid is likely not your only concern. You might also be wondering which colleges and universities have large international populations. Large numbers of international students at a particular school indicate a more diverse student body. If this criterion is important to you, you’ll definitely want to check out the following list of schools. Keep in mind that this list is based on the percentage of international students, and not necessarily raw numbers of international students - many large, metropolitan schools attract a significant number of students from outside the US. You might notice that there’s no overlap between the following schools and schools that provide the most financial aid to international students. If you’re interested primarily in schools with a large international student presence, keep in mind they may be significantly more expensive than the institutions listed above. You'll find more international clubs, activities, and social networks at schools that tend to attract high percentages of students from other countries. The following institutions- all national universities- reported the largest percentages of international students for 2017-2018. Source: US News World Report Florida Institute of Technology, Melbourne, FL Percentage of international students: 32% Total undergraduate enrollment: 3,635 New School, New York, NY Percentage of international students: 32% Total undergraduate enrollment: 7,203 University of Rochester, Rochester, NY Percentage of international students: 24% Total undergraduate enrollment: 6,546 Boston University, Boston, MA Percentage of international students: 22% Total undergraduate enrollment: 18,080 Carnegie Mellon University, Pittsburgh, PA Percentage of international students: 22% Total undergraduate enrollment: 6,896 Suffolk University, Boston, MA Percentage of international students: 22% Total undergraduate enrollment: 5,117 Brandeis University, Waltham, MA Percentage of international students: 21% Total undergraduate enrollment: 3,635 Illinois Institute of Technology, Chicago, IL Percentage of international students: 21% Total undergraduate enrollment: 2,900 University of California- San Diego, La Jolla, CA Percentage of international students: 20% Total undergraduate enrollment: 28,587 New York University, New York, NY Percentage of international students: 19% Total undergraduate enrollment: 26,417 Colleges With Special Services for International Students Some of the best colleges for international students offer specialized programs that make studying in the US a bit easier for foreign nationals. The following list is by no means exhaustive, but it’ll give you a place to start if you're looking for schools that offer unique, helpful services to international students. Some of these schools have dedicated centers for international students. They provide assistance in a variety of areas, including ESL instruction and student visa guidance. Other schools foster an easier transition for international students with mentorship programs or regular faculty check-ins. You may even find specialty scholarship programs meant for students coming from other countries. Many other schools offer resources to students both domestic and international, but the following programs are particularly notable for students coming from abroad. If you think you may need one special program in particular- ESL assistance, for example- I'd encourage you to contact the admissions office at any school of interest for more information. A little bit of help from a friend, peer, or professional can make all the difference. University of Arizona, Tuscon, AZ U of A hosts the Center for English as a Second Language, which helps students adjust to using English in professional and academic spaces. For more general assistance, students can go to the school's dedicated International Services Center. Finally, U of A offers an international student scholarship program. Students can receive between $4,000 and $35,000 per year. Purdue University, West Lafayette, IN Roughly 8,000 international students attend Purdue each year. The school publishes a quarterly newsletter for international students. Additionally, Purdue fosters an International Friendship Program where domestic students serve as mentors to ease any difficulty in transitioning to a US school. Clemson University, Clemson, SC About 1,500 international students enroll at Clemson each year. The school requires regular meetings between international students and staff to make sure students are happy and successful. University of Wisconsin- Madison, Madison, WI About 4,000 students from 130 different countries attend the University of Wisconsin. The school hosts a couple of notable programs. First, the BRIDGE (Building Relationships in Diverse Global Environments) program connects international students with US students during their first year in the US. Second, the Assembly of International Students connects the many international groups on campus to promote cultural awareness and understanding within the student body. Temple University, Philadelphia, PA Temple offers some alternative options to students who may not be ready for a fully English-immersive experience in the US. Their Intensive English Language Program is an educational program that preps students to enroll at a US school or to get a job that requires English proficiency. It is NOT a BA program, but a pre-program of sorts to prepare students for further study. Temple also offers "provisional/conditional admission" to competitive applicants who score below admissions threshold on the TOEFL. What Do You Have to Do to Attend a US School? As an international student, you’ll have to take a few extra steps if you plan on studying in the US. You’ll want to do your own research on any further steps or restrictions for students coming from your particular country, but I’ll give you a basic rundown here, so you know where to start, and you can check out our complete guide to the process for more details. There are more steps to take for international students to attend a US school, but not to worry- they're all laid out below. According to the US State Department, here are the five steps you need to take to study in the US: Step 1: Research Your Options If you’re reading this page, you’ve already begun this step! You’ll want to start this process 12-18 months before the start of the academic year you hope to start studying in the US. It’s especially important to gather information about application criteria and deadlines. If you need some extra help getting started, you should check out our guide on how to research colleges. Step 2: Finance Your Studies Again, you’ve already started gathering info on financing your studies if you’ve checked out the schools at the top of the page. Like I mentioned, schools can be pretty expensive in the US, so you’ll want to have a plan in place for funding your education. Read more about the different types of financial aid and the schools with the most generous aid policies. Step 3: Complete Your College Applications Each college app is unique, although there’s generally a lot of overlap. It’s important to start these applications well before the deadlines (which are often December-January). You might want to read more about the typical college application timeline. As an international applicant, you'll want to be especially careful about arranging for the SAT, ACT, and/or TOEFL. You may not have to submit your TOEFL scores to some colleges if you meet a certain score threshold on SAT/ACT sections. Read more about SAT and ACT prep for ESL and bilingual students to help plan for these important parts of US college applications. Step 4: Apply for Your Student Visa It’s important to allocate plenty of time to complete and submit your visa application, in case any complications come up. Visit the State Department’s website for more information on applying for your visa. Step 5: Prepare for Your Departure This is where you square everything away and make sure all your travel arrangements and documents are ready to go and in compliance. Your new school may also have information available for things like student health insurance, climate, local transportation options, and housing. What's Next? Motivated to start working on your college applications? Great! But before you do, you should definitely figure out which standardized test- the SAT or the ACT- is better for you (did you know that it doesn't usually help to take both)? You might need to do ACT/SAT prep a little differently than the typical US student. For an introduction, read our complete guide to the ACT SAT for international students. Want to improve your SAT score by 160 points or your ACT score by 4 points? We've written a guide for each test about the top 5 strategies you must be using to have a shot at improving your score. Download it for free now:

Privacy of Social Media Annotated Bibliography Example | Topics and Well Written Essays - 750 words

Privacy of Social Media - Annotated Bibliography Example The Writing: the works from this publication is a detailed statement which provides directions under the law that emphasizes the need to maintain privacy in the social sites. The websites and social sites are under obligation to protect their customer’s information and not to share them without permission. The Use: This document will help me highlight the law in relation to privacy in the social media.Determann, Lothar. "Social Media Privacy: A Dozen Myths and Facts." Stanford Technology Law Review (2012): 1-14.  The Writer(s): the author is an expert in social media analysis. Publication: this is a publication of the social media privacy from Stanford Technology Law Review. The publication is a recent publication which is valid and up to dateThe Writing: the publication contains 8 myths about social sites. The myths are actual the rights to the consumer who uses the social sites. This article is an educative article drawing its teachings from the law about social privacy in the media.The Use: This article will be useful to me when making an introduction about my research. It will help me highlight some of the rights consumers have over the social sites in the media. The author is the senior research analyst at Pew Internet Project Publication: this is a publication of the social media privacy.   The article is a resent publication from the date. The Writing: the article aims at finding out why most users are restricted to privacy settings while the cases of profile pruning and unfriending people are the rise.

To Have or To Be by Erich Fromm Essay Example | Topics and Well Written Essays - 500 words

To Have or To Be by Erich Fromm - Essay Example The problem with the â€Å"having† mode is that the greed for money and possession can never be satisfied no matter how much has acquired. People will always use dubious means to get more; including the exploitation of fellow human beings. â€Å"The ordinary man with extraordinary power is the chief danger for mankind† Fromm, (67). There is always a cut-throat competition among members of society in getting more possession. And when one has acquired a certain amount of riches, he is struck by paranoia. He or she is in a constant state of fear that the property may be stolen or that death may come so soon. Unlike the â€Å"having† mode, the â€Å"being† mode is quite a stationary state in life. Here, man does not really seem to toil for money and other materialistic things of the world. Man is satisfied with the intangible aspects of life such as peace and harmony. He adores love as the only source of joy: â€Å"Love is the only sane and satisfactory answer to the problems of human† (Fromm, 70). He can get pleasure without using money. In fact, everything is a source of his happiness, depending on the perception. The individuals in this state are selfless and can freely share whatever little they have. To them, all the worldly things are meaningless and perishable. Therefore, they see no great deal in investing in material things. The problem with the â€Å"being† mode is that an individual may be isolated from the modern society whose most members are in the â€Å"having† mode. Since the pleasure of the people in this mode is free, they may sometime s misuse this freedom. The problem with â€Å"industrial religion† is that it is economic oriented and enslaves its followers by work. According the ancient religion was viewed as matriarchal where; the church was full of unconditional love and mercy. However, the modern churches are viewed as patriarchal; justice is the order of the day. Fromm states, â€Å"The deepest desire of the human

His 7 Essay Example | Topics and Well Written Essays - 500 words

His 7 - Essay Example These trading outposts later served the Chinese and Arab markets as well. There were several Indian ports from where large ships sailed towards east to Khruse. In the sixteen and seventeenth century pepper became the main South East Asian cash crop and by 1510 Sumatra and Malaya were producing about 2500 tones of pepper a year in contrast to 3600 tones exported by Kerala in South India (Tarling, 122). As time passed the need for other spices along with pepper kept on increasing. The increase in South East Asian production all went almost to fill the growing demands of Europe, and then the Portuguese intervened via the Indian Ocean. When the English and Dutch arrived South East Asia became the major source of world spices and the centre of competition for Portuguese, English, Dutch, Chinese and Indian buyers. The price levels were high throughout the period. The period since 1570-1630 was a prosperous time for Japan when the country unified and it increased its trade license to a numb er of countries. In order to improve economic activities in the region few associations were formed including Asian Pacific Economic Corporation (APEC) and Association of South East Asian Nations (ASEAN). It has signed different trade agreements in order to boost the South East Asia's economy. As early as 13th century globalization was carried out in South East Asia via the l

Struggle in Fairy Tale Essay Example | Topics and Well Written Essays - 500 words

Struggle in Fairy Tale - Essay Example Realism makes a story appealing to the reader (Moore 1995). However, realism seems very minimal in fairy tale prose. This realism is concerning about the action/reaction relativity in the story setting of the situation in the fairy tales.Somehow their unrealism can be credited for by the given struggle to them by its authors. Also by the very characterization of the characters that speak and reacted unexpectedly that made the story less credible.An interesting story mostly relies on the reaction from the action given or from the struggle that the main character dealing with as a conflict. Literature scholars have been discussing and affirming this literary concept.In the matter of the fairy tale concept, it was traditionally formulated that the functions of the characters serve as the stable "serve as stable, constant elements in a tale, independent of how and by whom they are fulfilled", according to Russian Scholar Vladimir Propp (Lefavole. Org 2008). He also said that it has been observed that the number of function in the fairy tale is limited and its sequence of function is often identical (Lefavole. Org 2008).Study says that changing the obstacle or danger of the story could also affect the reaction of the character. Thus the changes in the story then able to comply to the expected realism that critical reader would highly appreciate or prefer.

International standards on customs services Essay

International standards on customs services - Essay Example In addition, the customs offices that are not working in collaboration with the international community can create chaos in issues like intellectual property and patenting. Thus, the need to have international standards in customs services has been well understood by people. As a result, a large number of international regulatory bodies have taken birth. The very first one is World customs Organisation which represents more than 166 members. On 23 June 2005, all the members of WCO accepted the SAFE Framework of Standards to Secure and Facilitate Global Trade. The Framework intends to provide supply chain security and facilitation at a global level in order to enhance certainty and predictability. Also, it ensures an integrated supply chain management for all modes of transport. This introduces a number of changes in the existing system. Firstly, it harmonises advanced electronic cargo information requirements on inbound, outbound and transit shipments. Also, according to the Framework, it is the sending nation’s customs administration that performs outbound cargo inspection instead of the receiving nation. Such inspections will adopt non-intrusive detection equipments like x-ray machines and radiation detectors. This ensures that a clearance can be made before the cargo reaches the destination (World Customs Organization, 200 7, p.6-7). Another one is the World Trade Organisation (WTO) that deals with the global rules or trade between nations. This organisation works to see that trade is conducted smoothly, predictably and as freely as possible. The WTO usually covers goods, services and intellectual property. As nations become members of WTO, they have to disclose all the laws and regulations they have adopted. Then, the WTO committees will work to see that the WTO agreements are properly followed by the member nation. In

Ways in which the internet has changed the way business operate in the Essay

Ways in which the internet has changed the way business operate in the global marketplace - Essay Example It is a business process in which jobs of one organization is getting done in another distant organization with the help of internet. In other words, an American organization can get their work done through an Indian organization without travelling to India. Internet provides all the platforms like email, audio and video conferencing etc for enhancing business communications between people staying in different parts of the world. It should be noted that India like countries have huge manpower strength and therefore labour charges in these countries are extremely low whereas in countries like America, manpower shortage is visible everywhere and therefore labour changes are more. Outsourcing helps American organizations to exploit the cheap labour markets and save billions of dollars every year. According to new figures released by the United States Department of Commerce e-Commerce Sales accounted for 2.4% of all sales in the fourth quarter of 2005, up from 2.3% the previous quarter, Total fourth quarter e-commerce revenues came to a seasonally adjusted $22.94 billion. For all year 2005, e-commerce sales rose by 24.6% according to information from the U.S. Census Stats (Internet World Stats News) E-commerce is another business segment developed as a result of the introduction of internet. Many people started to rely on internet for their purchasing needs. It is easy to purchase majority of the products available in the world through internet. One of the major advantages of internet purchase is the opportunity to purchase anything from anywhere in the world at any time, using credit cards. Internet opened many opportunities to sell domestic products in international market. Earlier, it was difficult for small companies to sell their products in international markets because of the difficulties in accomplishing exporting and importing formalities. However, it is easy for such companies to sell their products through internet without much hassles. â€Å"In

International standards on customs services Essay

International standards on customs services - Essay Example In addition, the customs offices that are not working in collaboration with the international community can create chaos in issues like intellectual property and patenting. Thus, the need to have international standards in customs services has been well understood by people. As a result, a large number of international regulatory bodies have taken birth. The very first one is World customs Organisation which represents more than 166 members. On 23 June 2005, all the members of WCO accepted the SAFE Framework of Standards to Secure and Facilitate Global Trade. The Framework intends to provide supply chain security and facilitation at a global level in order to enhance certainty and predictability. Also, it ensures an integrated supply chain management for all modes of transport. This introduces a number of changes in the existing system. Firstly, it harmonises advanced electronic cargo information requirements on inbound, outbound and transit shipments. Also, according to the Framework, it is the sending nation’s customs administration that performs outbound cargo inspection instead of the receiving nation. Such inspections will adopt non-intrusive detection equipments like x-ray machines and radiation detectors. This ensures that a clearance can be made before the cargo reaches the destination (World Customs Organization, 200 7, p.6-7). Another one is the World Trade Organisation (WTO) that deals with the global rules or trade between nations. This organisation works to see that trade is conducted smoothly, predictably and as freely as possible. The WTO usually covers goods, services and intellectual property. As nations become members of WTO, they have to disclose all the laws and regulations they have adopted. Then, the WTO committees will work to see that the WTO agreements are properly followed by the member nation. In

Decision Making Models Essay Example for Free

Decision Making Models Essay Managers have the responsibility of making decisions within that guide and provide direction to their organizations. Although decisions may be made by individuals, groups, or teams, it is the manager who coordinates the process of decision making. Managers make use of various decision making models to effectively steer the organizations. It is worth to noting that there is no one model or style that is always right or perfect in decision making. This is so because different people are successful and satisfied using different styles. There are two major broad models of decision making. These are the deterministic and probalistic models. The deterministic models result in good decisions with good outcomes. The manager using this model is able to get what he/she expects i. e. the out come is risk free. In probabilistic decision models, the expected results are uncertain and thus making good decision may not necessarily lead to good outcomes. The probabilistic decision making model is characterized by more concern with both the outcome value and the amount of risk each decision carries. All other effective decision making models can be classified as either deterministic or probabilistic model. The other subcategories of decision making models are mechanical, mental/verbal, analytical, and simulation. These models are classified based on such characteristics such as types, evolution in time, and availability of information (McCall M. , and Kaplan, R. (2001). ). Mechanical models take physical appearance of the object. They are used to display or test the design of items ranging from new buildings to new products. Mental/verbal models are also important and can be used to verbalize decision strategies for more complicated decision making models. The other model is analytical model which is a mathematical model and aimed at simplification, abstraction of real systems to give insight and understanding to some interested aspect of reality (Klein G. , et al. , (Ed. ) (1993). The analytical models are applicable to the deterministic systems. A simulation model is the last model that I am going to address. Simulation models are the computerized duplications of real systems and are seen to be more realistic, especially when modeling dynamic/probabilistic systems e. g. as used in aviation industry. Current Application Decision making models have assisted managers a lot in making viable decisions within the organization. The models discussed above have been implemented by individuals within organizations to come up with good decisions. For instance, the mental/verbal model has been used to aid in problem identification, in the development phase as well as the selection phase of decision making. Decision support system (DSS) has found usage in air-line management. Decision support systems and the models have been used to make decision both under risk, certainty, and even conflict in organizations. Other applications of the decision making models include the DSS for fiber optic Network Architecture Design and application of technology to cardiovascular diagnosis. Decision making models have also been used in forecasting with examples such as regression models and Box-Jenkins models. In brief, the use of effective decision making models by mangers has helped organizations to improve their businesses as a result of quality decision. The various effective decision making models used by mangers have both benefits and drawbacks or challenges associated with them. Mechanical decision making models have the advantage of being usable for experimentation. Mechanical models are credited for clearly describing the problem of system under study and thus results in innovative designs alternatives for decision making. Mechanical models also have some challenges in that they do not contain explicit relationships between the decision alternatives and dependant variables or objectives Mental/verbal models make the manager unable to experiment with them and cannot be used to show how outcomes or measures of effectiveness change with decision alternatives. It is also not possible to show how the relationships change with the decision alternatives. These models have the advantage of being easy to understand. They are also based on many years of managerial experience (Klein G. , et al. , (Ed. ) (1993). The advantages of analytical models include that they aim at simplification and bring understanding to some interested aspect of reality. They can also help to test the effects of different decision alternatives, constants and parameter values more easily than with any other type of model. They can also analyze complex problems efficiently and concisely, and in many cases provide the cheapest way to analyze these problems. Although they are the most prevalent models in use today they may not be easily accepted by managers who lack training, experience and time to use them. Simulation models have a high degree of abstraction and as such many managers do not want to work with them. The reason of this could be lack of enough training in and exposure to those models. The other reason is that trained managers may lack sufficient time to pay attention to model. Despite these drawbacks the models are beneficial in the sense that in comparison to the mechanical model they can facilitate experimentation because both the independent variables, dependent variables, constants and parameters are explicitly related by language of mathematics.

Microprocessor based water level controller

Microprocessor based water level controller Microprocessor: The processor is the portion of a computer system that carries out the instructions of a computer program and is the primary element carrying out the computers function. The form, design and implementation of CPUs have changed but their fundamental operation remains the same. The microprocessor contains all the central processing unit (CPU) functions and is the ‘engine that goes into motion when you turn your computer on. The microprocessor is designed to perform arithmetic and logic operations that make use of small number holding areas called registers.The diagram of microprocessor is given as under: Also microprocessor is a multipurpose, programmable, clock-driven, register based electronic device that reads binary instructions from a storage device called memory, accepts binary data as input and processes data according to those instructions and provides as output. A microprocessor incorporates most or all of the functions of a central processing unit (CPU) on a single integrated circuit (IC). The first microprocessors emerged in the early 1970s and were used for electronic calculators, using binary-coded decimal arithmetic on 4-bit words. Other embedded uses of 4- and 8-bit microprocessors, such as terminals, printers, various kinds of automation etc, followed rather quickly. Affordable 8-bit microprocessors with 16-bit addressing also led to the first general purpose microcomputers in the mid-1970s.The most reliable circuit is water level Controller circuit which takes the task of indicating and Controlling the water level in the overhead water tanks. The LED Bar graph is use d for displaying the water level.The water level is sensed with the help of copper probes. The probes which have to be monitored are inserted into the water tank.This water-level Controller circuit is configured around the well-known 8 bit Microprocessor 8085. It continuously monitors the overhead water level and display it and also switch ‘off† the motor when the tank fills and it will automatically switch On the Motor when the water level is low. The Microprocessor will also indicate the water level over the LED display. All the input and output functions are done through the Programmable Peripheral Interface IC 8255. Product Categories for water level controller: Liquid Level Switches Liquid Level Sensors Level Sensors Level controllers Water Quality testing instruments Level Guages Ph controlllers Introduction to Water Level Controller: In most houses,water is first stored in an underground tank (UGT) and from there it is pumped up to the overhead tank (OHT) located on the roof. People generally switch on the pump when their taps go dry and switch off the pump when the overhead tank starts overflowing. This results in the unnecessary wastage and sometimes non-availability of water in the case of emergency. The simple circuit presented here makes this system automatic, i.e. it switches on the pump when the water level in the overhead tank goes low and switches it off as soon as the water level reaches a pre-determined level. It also prevents ‘dry run of the pump in case the level in the underground tank goes below the suction level. In the figure, the common probes connecting the underground tank and the overhead tank to +9V supply are marked ‘C. The other probe in underground tank, which is slightly above the ‘dry run level, is marked ‘S. The low-level and high-level probes in the overhead tank are marked ‘L and ‘H, respectively. When there is enough water in the underground tank, probes C and S are connected through water. As a result, transistor T1 gets forward biased and starts conducting. This, in turn, switches transistor T2 on. Initially, when the overhead tank is empty, transistors T3 and T5 are in cut-off state and hence pnp transistors T4 and T6 get forward biased via resistors R5 and R6, respectively. As all series-connected transistors T2, T4, and T6 are forward biased, they conduct to energise relay RL1 (which is also connected in series with transistors T2, T4, and T6). Thus the supply to the pump motor gets completed via the lower set of relay contacts (assuming that switch S2 is on) and the pump starts filling the overhead tank. Once the relay has energised, transistor T6 is bypassed via the upper set of contacts of the relay. As soon as the water level touches probe L in the overhead tank, transistor T5 gets forward biased and starts conducting. This, in turn, reverse biases transistor T6, which then cuts off. But since transistor T6 is bypassed through the relay contacts, the pump continues to run. The level of water continues to rise. When the water leve l touches probe H, transistor T3 gets forward biased and starts conducting. This causes reverse biasing of transistor T4 and it gets cut off. As a result, the relay de-energises and the pump stops. Transistors T4 and T6 will be turned on again only when the water level drops below the position of L probe. Presets VR1, VR2, and VR3 are to be adjusted in such a way that transistors T1, T3, and T5 are turned on when the water level touches probe pairs C-S, C-H, and C-L, respectively. Resistor R4 ensures that transistor T2 is ‘off in the absence of any base voltage. Similarly, resistors R5 and R6 ensure that transistors T4 and T6 are ‘on in the absence of any base voltage. Switches S1 and S2 can be used to switch on and switch off, respectively, the pump manually.You can make and install probes on your own as per the requirement and facilities available. However, we are describing here how the probes were made for this prototype. The author used a piece of non-metallic condu it pipe (generally used for domestic wiring) slightly longer than the depth of the overhead tank. The common wire C goes up to the end of the pipe through the conduit. The wire for probes L and H goes along with the conduit from the outside and enters the conduit through two small holes bored into it as shown in Fig. 2.Care has to be taken to ensure that probes H and L do not touch wire C directly. Insulation of wires is to be removed from the points shown. The same arrangement can be followed for the underground tank also. To avoid any false triggering due to interference, a shielded wire may be used. The Water Level Controller System is an Electronic Equipment which when electrically connected to the starter of any given Pump-set motor will control the operation of the pumpset depending upon the water level in the Source and Destination Storage Tanks. Advanced Automatic â€Å"WATER LEVEL CONTROLLER† unit Manufactured by M.V.Instruments is a Microprocessor based Electronic Device. This system when electrically connected to an Pumpset starter, performs the following functions automatically: Switches ON the Pump set when Water level drops below pre-set level (i.e. T2 level) in Overhead Tank. Switches OFF the Pump set when Water level in Overhead Tank becomes full (i.e. T1 level). Switches OFF the Pump set when Water level is low in Sump/Well/Borewell (i.e. S2 level). Switches ON the Pump set when there is sufficient water in the Sump/ Well / Borewell (i.e. S1 level). Switches OFF the Pump set when there is a Dry run (i.e. when Water is not being pumped into Overhead Tank due to any reason). Low Voltage and High Voltage Protection for the Pump set is incorporated. The system has Surge Voltage/Current Protection for the Pump set. All these functions are automatically performed. Manual interference is absolutely not required. Manual operation is also possible if and when required by operating the switch in Manual Position. Paragon Water Filters use a unique 5-Stage filtration system that combines the cleaning capabilities of Activated Carbon with the new technology of KDF-55: The first stage consists of a micron filter locked into place, preventing water from forming paths or channels along the sides of the unit. Once the first micron filter has removed any large particles, the water goes through a series of chambers FIVE STAGES IN ALL. The media filtration process begins with KDF-55, which uses an electrochemical process to reduce Chlorine and improve taste and odor. Water passes through progressively finer micron filters as it travels through the unit, to assure removal of particles and to separate the media so that they operate at maximum effectiveness. The final chamber contains the highest quality Granular Activated Carbon. Water tastes best when aerated with carbon, so this final stage assures that you water is as refreshing as it is clear. Principle: The Autonics Water Level Modulating controlsystem is a single element Electro-pneumaticcontrol with a pneumatic Positioner and PID/Fuzzysystem. The system comprises a Transmitter,converter module, float chamber, a feedline-modulating control valve and an electronic microprocessor based PID/FUZZY controller. Pid Fuzzy Level Controller: Description: The Autonic Water Level Modulating control system is a single element Electro-pneumatic control with apositioner and PID auto tuning system. i) A Level Transmitter with double-float chamber is mounted on the boiler shell, fitted with a coil which can be make according to the requirement. ii) A flanged mount fully stainless steel Control valve, fitted with a positioner and pneumatic actuator, which is mounted in the boiler feedline. iii) A microprocessor-based PID/FUZZY Level controller is mounted on the control panel. iv) An electronic Converter module is also mounted on the control panel. Operation: A positive change of water level in the boiler alters the level transmitter inductance value of coil causing an imbalance in the system. This signal is transmitted through the electronic control box and connected to PID controller. Then the microprocessor-based PID level controller transmitted anelectrical signal to the pneumatic positioner to position and adjusts the position of control valve. A additional low/high water level alarm or burner cut out contact are also provided in the microprocessor-based level controller with the adjustable setting position. Installation note: The water connection from the boiler to the float chamber should be, as short as possible and the level transmitter float chamber should be mounted close to gauge glasses. If required our technical staff will advice on individual installations. Important notice: Electronic level module and level controller must not be subjected to either vibration or excessive temperature. It is therefore recommended that they be not mounted directly on to the boiler shell. Specifications : Control valve : The V control valve has many different inserts for precision throttling control. The inserts are pinnedto the END CAPS, and are used in conjunction with any of our standard seats. They are designed tochange the flow characteristics of the valve and are offered in different shapes to meet a variety ofmodulating application. For very low Cv applications, a specially designed â€Å"Soft† V insert incorporateboth the flow element and the ball seal into one component, and maintains continuous contact with theball. This arrangement provides excellent low end accuracy (EQ%) and repeatability. Automatic Water Level Modulating Control System: Operating Principle: Transmitter: Detect the water levels in the drum and send signal to the digital controller. Digital controller With the signal given by the Transmitter and the controller will show the level on the meter (Process value) and it requite a Set Value to control the level. The signal converted and it sends to control valve to give an indication. Control Valve The control valve work depend on the signal given by controller and after done the job it send a feed back signal to controller for confirmation. The valve open is depending on supply air with the signal given by controller and the Positioner then adjustment opening of valve will be make. OTHER: The MC9200 Series Cooling Tower Controller is a microprocessor based controller of recirculating cooling water systems. The MC9200 accurately controls the level of dissolved solids based on  µS/cm, and depending on model selection, control conductivity and pH. The cooling tower controllers feature: One user selectable chemical feed timer and up to two 28-day event timers Lockable viewing window Two point calibration Dry contact water meter input capability Alarm powered dry contact relays Optional 4-20mA output capability Alarm LED, relay or optional callback status 216 alphanumeric display Convenient keypad menu access, display contrast adjustment and HOA access control Self charging capacitor to maintain time and history for up to two weeks in the event of a power loss to controller Relay, general alarm, flow alarm and power status LEDs DIN connections for conductivity sensor and I/O Prewired incoming power and relay output connections on specified models (receptacle cords) Modular flow assembly with flow switch, quick release sensors and sample port mounted on the polyethylene panel Optional remote communications capability via direct serial line or modem connection Features: 1 Chemical Feed Timer Two Point Calibration DIN connections for I/O Full 24 months warranty Ph Control Made Easy: The CHEMTROL 240 is a microprocessor-based digital controller designed to maintain the pH level in water treatment applications. Standard Features:- All Functions on Front Panel Adjustable Setpoint Adjustable Alarms Proportional Feed Overfeed Safety Timer Waterproof Cabinet Easy to install Simple to use 5-year Electronics Warranty Toll-Free Technical Support The bright LCD display shows pH readings, calibration adjustments and alarm limits. The five LED lights indicate the operating mode (OFF, Manual or Auto), feed status, out-of-range alarms and overfeed alarms. The front panel controls include setpoint, calibration, low and high alarm limits, safety timer limit and proportional feed adjustment. Feed control is either ON/OFF or Proportional. The Proportional Feed feature is particularly useful to avoid overfeeding in small bodies of water. It reduces the feed cycle time progressively as the sensor reading gets closer to the setpoint. General The controller shall provide microprocessor based control of recirculating cooling water systems. Accurately control the level of dissolved solids based on ïÆ' ¬S/cm, and depending on model selection,control conductivity and pH. Controller shall also provide: One user selectable chemical feed timer and up to two 28-day event timers. a. Lockable viewing window. b. Two point calibration. c. Dry contact water meter input capability. d. Alarm powered and dry contact relays. e. Optional 4-20mA output capability. f. Alarm LED, relay and optional remote callback status. g. 2 x 16 alphanumeric display. h. Convenient keypad menu access, display contrast 2. Adjustment and HOA relay control. a. Self charging capacitor to maintain time and history for 3. Up to two weeks in the event of a power loss to controller. a. Relay, general alarm, flow alarm and power status LEDs. b. DIN connections for conductivity sensor and I/O. c. Prewired incoming power and relay output connections 4. On specified models (receptacle cords). a. Modular flow assembly with flow switch, quick release 5. Sensors and sample port mounted on a polyethylene panel. a. Optional remote communications capability via direct 6. Serial line or modem connection. a. A full 24 months warranty. Control Functions All continuously monitored sensor input functions (conductivity, pH) will provide user definable set points for maintaining a specific value within the system. Each set point will have a user definable differential as the control band, programmable high and low alarm points and user defined limit timer for pH. Chemical Feed Timer The chemical feed timer shall be user selectable as any one of the following: Percent User will be able to select a percent ON time of a user defined cycle time. Limit Timer will run as controller bleeds until a user programmed limit time is met or the bleed is satisfied. Percent of Post-Bleed Timer will run for a user defined percentage of the bleed time after bleed is satisfied. Pulse Timer Timer initiated from dry contacting head water meter. User can define timer run time, water meter input and contact accumulation before timer initiation. Remote Communications: The controller shall have the optional capability of serial communications using PULSAworks software. The serial communications can occur either by direct RS232 port, or remotely via an optional internal modem. PULSAworks allows the user to access real-time system values and remotely change operating parameters. The user may download data history files and save files to disk. History files may be viewed and printed in table or graph form, the graph form can be user customized. The optional internal modem allows the controller to perform alarm call back for alarm condition notification to a pager or computer running. There are other various types of water level controllers in which some of them are as under: IC 8255. Digital Water Level Recorder The standard virtual make water level recorder consists of a weatherproof enclosure which contains the data logger, level sensor and power supply, and comes complete with a solar panel and data shuttle. The system is powered by rechargeable sealed maintenance free batteries with integral 12V/10W solar panel, which will easily keep the batteries charged throughout the year. Unattended recording of Water level with maximum and minimum level, Standard program and user-friendly software . Data retrieval by Data shuttle to your Computer, Suitable for mounting in a variety of locations, Memory range more than 8250 data sets extendable up to more than 16500. Digital Water Level Recorder (Pressure Type) This is a Micro controller based Automatic Water Level Recorder reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this data logger for the collection of real time data automatically. The micro controller has its internal memory along with an additional 128K EEprom, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm, and integral cable contain a vent tube for Barometric pressure compensation. Comes with three ranges 10 meter, 35 meter 100 meter Ground Water Monitoring System: The new SEBA Data Logger type MDS Dipper-3(T3) is the consequential further development of the well proven MDS Dipper for continuous registration in ground and surface water, with special focus to the operation data security. A watch-dog-function, integrated in the MDS-DipperT3 supervises continuously the microprocessor activities and so it provides a high operation security. Undefined system conditions are recognized immediately and eliminated by the Watch-dog function. High accurate, robust ceramic pressure measuring cell for different measuring ranges (i.e. 1 bar, 2 bar, etc.) and Temperature sensor for 025 °C or 050 °C. The MDS Dipper-3(T3) is equipped with a Flash-memory (Flash-RAM). The acquired measuring data are stored in a ring memory organization. Due to the described double data storage, you have access to the complete measured data in the archive data backup, even in case of breakdown of the power supply Measuring system for the observation of groundwater measuring sites, pumping tests, construction areas, Surface water levels Made of stainless steel High data security due to additional flash-memory Watch-dog-function for high operation security Maintenance-free, battery life time >10 years, exchangeable battery Installation in tubes from 1† diameter Optional connection via Bluetooth at Extra Cost

relationships in Ordinary People :: essays research papers

Beth and Calvin   Ã‚  Ã‚  Ã‚  Ã‚   The relationship between the husband and wife seems initially to be perfect. They both show each other expressions of love. There is understanding, harmony, financial security, and good communication between them. The couple spends a lot of time together, discussing future plans, and talking about the good moments they had in the past. However, behind all of this positive interaction between the two of them is something they are both not able to face. The tragic loss of their son, Buck has caused a great amount of pain and anger they are not expressing.   Ã‚  Ã‚  Ã‚  Ã‚  The wife lived in denial, trying to live the life of a perfect person unaffected by what had happened to her son Buck. A certain image had to be upheld and everything else was secondary. Even the love for her husband was not as perfect as it was shown..She tries to keep these feelings and memories of her lost son buried deep inside her. She finds it very difficult to show any emotion concerning the fact that one of her sons is never coming back. She tried to portray an image of things being just perfect. Her portrayal includes not wanting to discuss anything that may upset her, she is always walking away from the conversation. It seems as though she does it in every scene. The scene that caught my attention the most was at the end, when she walked away from Calvin after he said he wasn’t sure if he still loved her. That is a pretty powerful statement, and you would think she would want to know why. I’m sure she did, she just didn’t know how to discuss it. So par for the course, she walked away, with something else she will have to tuck away for the rest of her life. Conrad and Calvin   Ã‚  Ã‚  Ã‚  Ã‚  Conrad and his father, Calvin, had a very good and strong trusting relationship. Although Conrad was stubborn and didn't want to speak of his troubles, Calvin would keep trying and didn't give up. Calvin really cared for Conrad and wanted him to share his feelings and emotions. For example, there was a scene when Calvin would walk into Conrad's room just to make sure he was doing fine. Calvin not only showed his affections nonverbally, he showed them verbally also. He wanted to see his son back to life, back to who he was.